SCREEN PRINT TRANSFERS
MAKE SURE TO READ DESCRIPTIONS FOR PRESSING FOR EACH TRANSFER
Recommended Heat Press Machines
- Hix N880, HT400, HT600,S650, SM20
- Hotronix, Fusion, Maxx
- Geo Knight, Auto, Clam, Swing. *Must be able to provide 50 PSI
- Insta Heat Machines
Application Instructions For Varsity Prints
- Preheat Garment if necessary to remove excess moisture
- Temperature: 375°F / 183°C
- Time: 7 - 10 seconds
- Pressure: 60-70 PSI
- Do not use a teflon sheet or teflon bonnet between heat platen and transfer paper
If your transfer isn’t adhering to garment....
Not enough time pressing. Increase pressing time.
 Not enough pressure. Increase pressure if needed
Temperature is too low. Increase temperature.
Cold spots on heating platen. Check temperature using a laser heat gun.
Warped or dirty heating platen. Clean with non-abrasive cleaner.
Defective bottom pad. Replace pad.
May be using a teflon sheet/pad. Do not use a teflon sheet/pad.
